How to Build a Cornhole Set

20160722_161116
Last year my Grandparents had the entire family (around 50 people) out to their farm for a get together. I brought my bean bag/cornhole set with and it was a big hit, so I decided to make a couple sets for them to keep out there for the yearly reunion. I decided to go with a barn door set and a camouflage set to fit the theme of the farm.

20160602_194420

I had Home Depot rip a sheet of plywood into quarters to make it easier to haul but the pieces weren’t all square. I stacked them and used a circular saw jig to rip them all to equal sizes. The movable workbenches are great to keep the dust off the cars in the garage.

20160624_190233

I marked all the 2×4’s to size and batch cut them on the miter saw.

20160624_191108

2×4’s have rounded edges from the mill so I took them all to the jointer and squared one side up. This way there is a clean edge where the board meets the plywood. The jointer was my father in laws when he first started woodworking. While I was restoring it, the best information I could find was that it was made by Montgomery Ward (yes, the retail store), and was made in or around 1947! After a little elbow grease and some new blades it runs like it was made yesterday.

20160627_211623

I built an out-feed chute to dump the chips into a bucket. I filled this up more than once while cleaning up the boards. Not bad for a 70 year old machine.

20160624_201411

Found the center of the plywood and measured down 9″ from the top for the 6″ holes.

20160624_201610

Used a large drill bit to make some relief holes around the inside of the circle.

20160624_201826

Using the jigsaw, I cut the hole out, stopping at the relief holes to reposition myself around the board.

20160624_202130

Sanded to the line on the oscillating spindle sander. I rarely use this sander, but when I need it, it’s really handy. That would be a tough are to sand without it.

20160624_203151

I marked out a 3/4″ line all the way around the plywood to hit the center of the 2×4 frame. I then drilled and counter-sunk holes to attach the top to the rails with screws and glue.

20160627_212541

Clamps removed and everything is still holding! I left a 1/16″ overhang when attaching the 2×4’s and came back with a flush trim bit in the router to make a nice seamless edge where the components meet.

20160627_212645

Looks a lot cleaner now.

20160628_202542

The plywood wasn’t the greatest quality so there was plenty of sanding to be done.

20160628_223135

Used some wood putty to fill all of the screw holes. Once the putty turns white, it’s dry and ready for sanding.

20160706_195207_001

Time to work on the legs. I found the center of 2×4 and used a roll of tape to stencil a roundover.

20160706_195410

Used the band saw to cut all 8 round legs out.

20160706_195601

Sanded to the line on the disc sander. This is another one of those tools that I don’t use all that often but am always glad to have it when I need it.

20160706_195937

I drilled a small pilot hole in the center of the legs.

20160706_200308

I then used that hole as a pilot for a long bit which reaches through the frame. I used a scrap of 2×4 to space the leg out from the frame. This allows room for the leg to fold back and rest against the frame while standing.

20160706_200606

Then I used the full 3/8″ bit to finish out the hole all the way through and put a 3/8″ carriage bolt and wingnut in. This allows the legs to swivel.

20160706_200759

The boards need to stand 12″ off of the ground with the legs out. To figure out the angle of the feet, I stacked scraps of wood until I hit one foot.

20160706_200934

I then extended the leg and made a line where the ground level will be.

20160706_201040

Set the miter saw up at that angle and cut all of the legs to length. This method was easier then figuring out the angles and lengths to hit the 12″ height.

20160718_210828

And now time for the painting. This was the trickiest part of the build. I had no idea how to paint camouflage but I purchased some camo spray paint colors and some barn red paint.

20160718_212029

After priming all of the boards I dove in. I painted two of the boards solid green as a base for the camouflage.

20160720_182339

I ended up coming up with this idea for the barn door. The plan was a white frame with an X on the bottom half.

20160720_184447

No turning back now!

20160720_192454

I was originally going to go for more of a realistic camouflage paint job but I thought a cartoonish paint scheme would be more fun for this cornhole set. I took a large sheet of cardboard and free handed a pattern.

20160720_195814

I used a utility knife to cut out all of the shapes and got ready to spray. Kept the garage door open to minimize my paint high.

20160720_213825

I tried to mix up the colors and alternate them in a somewhat random pattern. I used smaller pieces of cardboard to cover the cutouts around the area I was currently spraying.

20160722_110005

In the meantime, my wife helped out immensely by sewing all 16 of the cornhole bags. We chose green and brown for the one set, red and black for the other. Corn was measured out on a scale to “regulation” and filled into the duck cloth fabric bags. This was extremely time consuming and probably much more difficult then the boards were!

20160722_174825

In between coats of paint I decided to make a case for the bags. Being on a farm, I was worried that mice would eventually figure out what the bags were filled with and destroy them. Glued and broad nailed the box together then added a top with a couple of hinges.

20160722_180355

I stapled a small piece of rope to keep the lid from falling back and breaking the hinges.

20160722_183533

Made handles for the sides on the router table. I was really happy with the profile. They were glued and screwed with 3 1″ screws per handle. 16 bags weigh quite a bit so they needed to be strong.

20160722_192610

Here’s how it looks with the bags loaded up. In the center is a rope which is used to place the boards at regulation distance from each other.

20160720_214236

The camo paint job came out fantastic on the first cornhole set, I was really surprised how well they looked after I pulled the cardboard off!

20160722_000441

The barn door set came out equally as well. I really like the way the white looks against the red.

20160722_153139

Just about ready to be used!

20160722_154737

The cornhole set is not light and are awkward to carry so I added some handles to all of them.

20160722_161116

All four boards and 16 bags done! They came out better than I could have hoped and my grandparents were very thankful for them. They got quite a bit of use at the reunion and should hold up for years to come!

Tools and hardware used in this project

Aside from my table saw, I used pretty much every saw I own in this.


Whenever a project is being painted, it requires a lot of sanding. I hate sanding. Power tools save the day here.


When using an impact driver, it really helps to impact specific bits. The driver is just too powerful for standard bits and will break/strip them really easily. Learned that one the hard way.


I only have one router so I have to remove it from the bottom mounted router table when I need to use it standalone. I would love to pick up a trim router at some point so I can leave the big heavy duty one in the table at all times. The router bits here are pretty low quality, I’ll purchase some nicer ones when the time comes but this are still great for the price.


It’s certainly possible to use a good ol’ hammer and nails for attaching parts but an air compressor with a brad nailer is one of the fastest and handiest tools there is.


These are some of the various supplies that were used for finishing and making the bags. No woodworker is complete with a wife who can sew!


Try Amazon Prime 30-Day Free Trial

Share this post:

One Comment

Comments are closed.